Cisco 300-710日本語 : Securing Networks with Cisco Firepower (300-710日本語版)

Perhaps you still feel confused about our Securing Networks with Cisco Firepower (300-710日本語版) test questions when you browse our webpage. There must be many details about our products you would like to know. Do not hesitate and send us an email. Gradually, the report will be better as you spend more time on our 300-710日本語 exam questions. As you can see, our system is so powerful and intelligent. What most important it that all knowledge has been simplified by our experts to meet all people's demands. So the understanding of the 300-710日本語 test guide is very easy for you. Our products know you better.

Topics of Securing Networks with Cisco Firepower (300-710 SNCF) Exam

These core topics isted below are general recommendations for the material that is likely to be used for the examination. However, on any particular delivery of the test, other similar topics could also appear. The guidelines below can update at any time without notice to better represent the contents of the exam and for clarity purposes.

It is recommended that, where possible, the applicant use these courses and/or other resources to provide background information on the exam objectives. The syllabus for the Securing Networks with Cisco Firepower (300-710 SNCF) examination is listed below in detail of each section and their topics:

1. Deployment (30%)

Objectives covered by this section:

Objective 1.1 - Implement NGFW modes:

• Transparent mode
• Routed mode

Objective 1.2 - Implement NGIPS modes:

• Inline
• Passive

Objective 1.3 - Implement high availability options:

• Link redundancy
• Multi-instance
• Active/standby failover

Objective 1.4 - Describe IRB configurations

2. Configuration (30%)

Objectives covered by this section:

Objective 2.1 - Configure system settings in Cisco Firepower Management Center

Objective 2.2 - Configure these policies in Cisco Firepower Management Center:

• Identity
• Prefilter
• DNS
• SSL
• Malware and file
• Access control
• Intrusion

Objective 2.3 - Configure these features using Cisco Firepower Management Center:

• Correlation
• Application detectors (Open AppID)
• Network discovery
• Actions

Objective 2.4 - Configure objects using Firepower Management Center:

• Object Management
• Intrusion Rules

Objective 2.5 - Configure devices using Firepower Management Center:

• QoS
• VPN
• Certificates
• Device Management
• NAT
• Platform Settings

3. Management and Troubleshooting (25%)

Objectives covered by this section:

• Objective 3.1 - Troubleshoot with FMC CLI and GUI

• Objective 3.3 - Troubleshoot using packet capture procedures

• Objective 3.4 - Analyze risk and standard reports

• Objective 3.2 - Configure dashboards and reporting in FMC

4. Integration (15%)

Objectives covered by this section:

• Objective 4.6 - Describe Rapid Threat Containment (RTC) functionality within Firepower Management Center

• Objective 4.3 - Implement Threat Intelligence Director for third-party security intelligence feeds

• Objective 4.1 - Configure Cisco AMP for Networks in Firepower Management Center

• Objective 4.5 - Describe Cisco FMC PxGrid Integration with Cisco Identify Services Engine (ISE)

• Objective 4.4 - Describe using Cisco Threat Response for security investigations

• Objective 4.2 - Configure Cisco AMP for Endpoints in Firepower Management Center

Automatic analysis your practice

Once you have practiced on our Securing Networks with Cisco Firepower (300-710日本語版) test questions, the system will automatically memorize and analyze all your practice. You must finish the model test in limited time. There have a timer on the right of the interface. Once you begin to do the exercises of the 300-710日本語 test guide, the timer will start to work and count down. If you don't finish doing the exercises, all your exercises of the 300-710日本語 exam questions will be delivered automatically. Then the system will generate a report according to your performance. You will clearly know where you are good at or not. Then you can make your own learning plans based on the report of the 300-710日本語 test guide. Also, you will do more practices that you are not good at until you completely have no problem.

Skills Measured by 300-710

To get the passing score in the official test, the candidates must address the following skills as described below:

• Configuration — under this exam category, examinees will have to tweak the system configurations of Cisco Firepower Management Center and set up policies such as SSL, intrusion, malware & file, access control, identity, DNS, and pre-filter necessary for the Cisco Firepower Management Center. What is more, applicants will have to be aware of how to use that Center to adjust numerous aspects such as correlation, network discovery, actions, application detectors & Open AppID, intrusion rules & objects, and tweak various devices including QoS, NAT, Platform Settings, VPN, Certificates, and Device Management.
• Deployment — for the initial part, students must be able to incorporate NGFW modes such as transparent & routed ones, deploy NGIPS such as Inline & Passive, incorporate high availability facilities like standby/active failover, link redundancy, and multi-instance, and finally, explain IRB settings.
• Management & Troubleshooting — here, candidates must show they have the ability to adjust dashboards & analytics in Firepower Management Center, troubleshoot problems with the help of GUI & FMC CLI, anticipate risks, create reports, and lastly, use packet capture methods to carry out troubleshooting.
• Integration — in the final domain, students must demonstrate their ability to deploy Threat Intelligence Director when investigating security intelligence feeds from third parties, use Firepower Management Center to tweak Cisco AMP for endpoints and networks, explain the Cisco Identify Services Engine (ISE) & the Cisco FMC PxGrid Integration, carry out security checks with the help of the Cisco Threat Response, and finally, detail the use of the Rapid Threat Containment (RTC) feature found inside FMC.

Reference: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/sncf-300-710.html

Easy access to assistance

You can write down your doubts or any other question of our Securing Networks with Cisco Firepower (300-710日本語版) test questions. We warmly welcome all your questions. Our online workers are responsible for solving all your problems with twenty four hours service. You still can enjoy our considerate service after you have purchased our 300-710日本語 test guide. If you don’t know how to install the study materials, our professional experts can offer you remote installation guidance. Also, we will offer you help in the process of using our 300-710日本語 exam questions. Also, if you have better suggestions to utilize our study materials, we will be glad to take it seriously. All of our assistance is free of charge. We are happy that our small assistance can change you a lot. You don't need to feel burdened. Remember to contact us!

Suitable for all people

Different age groups prefer different kinds of learning methods. In order to meet the requirements of all people, we have diversified our 300-710日本語 exam questions to suit a wider range of lifestyles and tastes. At present, we have PDF version, online engine and software version. You can choose which 300-710日本語 test guide version suits you best. Generally, young people are inclined to purchase online engine or software version because they like experiencing new things. Middle aged people are more likely to choose PDF version because they get used to learning the printed Securing Networks with Cisco Firepower (300-710日本語版) test questions. Of course, the combination use of different version of the 300-710日本語 test guide is also a good choice. You can purchase according to your own tastes.

How much Securing Networks with Cisco Firepower (300-710 SNCF) Exam Cost

The cost of this exam is USD $300 but prices for Cisco examinations differ according to level and currency. Also exam vouchers can be used for discounts. To find out the cost of your test, click here and choose your country. To learn about prices and locations, visit the CCIE Lab Exam page

Cisco 300-710日本語 Exam Syllabus Topics: